联系我们

名称:河北定盈水刀切割机厂

电话:0312 2737685

手机:13903323742

邮箱:13903323742@163.com

地址:河北省定州市开元镇工业园区

新闻动态
激光切割机焦点位置在工件里面
1、激光切割机焦点位置在工件表面
1. The focus position of laser cutting machine is on the workpiece surface
这是最常见的焦点位置,也被称为0焦距,常用于切割SPC/SPH/SS41等工件,使用的时候让激光切割机的焦点贴近工件表面。在这种焦点位置下,由于工件上下表面的光滑程度会有细微的差异,因此往往贴近焦点的那一面的切割面会更加光滑,反之,远离焦点的那一面切割面会比较粗糙,在实际使用中,往往会根据上下表面的不同工艺需求而定。
This is the most common focus position, also known as 0 focal length. It is often used to cut SPC / SPH / SS41 and other workpieces. When in use, let the focus of the laser cutting machine close to the workpiece surface. In this focus position, due to the slight difference in the smoothness of the upper and lower surfaces of the workpiece, the cutting surface close to the focus will be smoother. On the contrary, the cutting surface away from the focus will be rough. In practical use, it will often be determined according to the different process requirements of the upper and lower surfaces.
2、激光切割机焦点位置在工件里面
2. The focus position of the laser cutting machine is inside the workpiece
焦点位置在工件里面称之为正焦距,而且一般在切割不锈钢或者铝材钢板等材料时会采用的焦点模式,让切割焦点位于工件内部。主要缺点在于切割幅度比较大,而且这种模式往往需要更强大的切割气流,温度要足,切割穿孔时间要更长一些。因此只有当切割不锈钢或者铝材等硬度较大的材质时选用。
The focus position in the workpiece is called positive focal length, and the focus mode is generally adopted when cutting stainless steel or aluminum, steel plate and other materials, so that the cutting focus is located inside the workpiece. The main disadvantage is that the cutting range is relatively large, and this mode often requires stronger cutting air flow, sufficient temperature and longer cutting perforation time. Therefore, it can only be selected when cutting materials with high hardness such as stainless steel or aluminum.

联系方式

  1. 名称:河北定盈水刀切割机厂
  2. 电话:0312 2737685
  3. 手机:13903323742
  4. 邮箱:13903323742@163.com
  5. 地址:河北省定州市开元镇工业园区

版权 © 河北定盈水刀切割机厂 网址:www.shuidaoqiegeji.cn  推荐:便携式水刀切割机,小型式水刀切割机,移动式水刀切割机

网站建设及优化保定遨游网络公司